Before using aluminum ramps, it is important to carry out the following checks:

1.Surface inspection: Check whether the surface of the aluminum ramp is smooth, without bumps, cracks or other damage. Make sure the surface is smooth and free of debris or dirt to reduce the risk of slipping.

2.Connector inspection: Check the connector of the aluminum ramp to ensure that the connection is firm and there is no loosening or falling off. Pay special attention to check the support feet and connecting pins of the aluminum ramp to ensure their safety and reliability.

3.Lateral stability check: Check the lateral stability of the aluminum ramp to ensure that it will not roll or shake during use. If the lateral stability problem is found, it is necessary to adjust or increase the support in time to ensure safety.

4.Load-bearing capacity check: Check whether the load-bearing capacity of the aluminum ramp meets the actual needs of use to ensure that it can withstand the expected load. Avoid overloading, so as not to cause damage to the aluminum ramp or accidents.

5.Anti-slip inspection: It is more important to check the anti-slip performance of aluminum ramps, especially when used in wet or rainy environments. Ensure that the surface of the aluminum ramp has sufficient friction to avoid slipping accidents during use.

6.Environment inspection: Check the environment around the aluminum ramp to ensure that there are no obstacles or other factors affecting the safety of use. If necessary, clear the surroundings to ensure smooth passage.

By carrying out these checks, the safety and stability of the aluminum ramp can be ensured during use, and the occurrence of accidents can be reduced.